AEG UPS 10 kVA, User Manual, Page: 27 / 56

OMD94016 REV.
C
27
5.3.2 ALARMS AND OPERATING STATUS
ALARMS
A1 MAINS FAULT A27 EEPROM ERROR
A2 INPUT WRONG SEQ A28 CRITICAL FAULT
A3 BOOSTER STOPPED A29 MAINTENANCE REQ
A4 BOOSTER FAULT A30 COMMON ALARM
A5 DC VOLTAGE FAULT A31 MBCB BUS CLOSED
A6 BATTERY IN TEST A32 EPO BUS CLOSED
A7 BCB OPEN A33 ASYMMETRIC LOAD
A8
BATTERY
DISCHARGE
A34 SERVICE REQUIRED
A9 BATTERY AUT END A35 DIESEL MODE
A10 BATTERY FAULT A36 DC FASTSHUTDOWN
A11 SHORT CIRCUIT A38 INV --> LOAD
A12 STOP TIMEOUT SC A39 INV ERROR LOOP
A13 INV OUT OF TOL A40 SSI FAULT
A14 BYPASS WR SEQ A41 RECT ERROR LOOP
A15 BYPASS FAULT A43 CURR ERROR LOOP
A16 BYPASS --> LOAD A46 PAR LOST REDUND
A17
RETRANSFER
BLOCK
A47 SEND PARAM ERROR
A18 MBCB CLOSED A48 RCV PARAM ERROR
A19 OCB OPEN A49 TEST MODE ERROR
A20 OVERLOAD A50 SSW BLOCKED
A21 THERMAL IMAGE A51 BATT TEMPERATURE
A22 BYPASS SWITCH A53 FIRMWARE ERROR
A23 EPO PRESSED A54 CAN ERROR
A24
HIGH
TEMPERATURE
A55 PAR CABLE DISC
A25 INVERTER OFF A56 MAINS UNBALANCE
A26 COMMUNIC ERROR A63 START SEQ BLOCK