You can deactivate the
appliance when the Function
Lock is on. When you
deactivate the appliance,
the Function Lock
deactivates.
10.4
Using the settings menu
You can set the settings menu only when
the appliance is deactivated.
The settings menu lets you activate or
deactivate functions in the main menu.
The display shows SET and the number
of the setting.
Description
Value to set
1
SET + GO
ON / OFF
2
RESIDUAL HEAT INDICATOR
ON / OFF
3
KEY TONE
1)
CLICK / BEEF / OFF
4
FAULTY TONE
ON / OFF
5
SERVICE MENU
-
6
RESTORE SETTINGS
ON / OFF
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1.
When the appliance is deactivated,
touch and hold for three seconds.
The display shows SET1 and "1" flashes.
2.
Touch
or
to set the setting.
3.
Touch
.
4.
Touch
or
to change the value
of the setting.
5.
Touch
.
10.5
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
Temperature
Switch-off time
30 °C - 115 °C
12.5 h
120 °C - 195 °C
8.5 h
200 °C - 230 °C
5.5 h
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off
does not work with the
functions: Core temperature
sensor, Light, Slow Cooking,
Duration, End, Time delay.
10.6
Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for
the next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
www.aeg.com
20