manualshive.com logo in svg

AEG OKO-LAVAMAT 88830 update, User Information

Share
Download
AEG OKO-LAVAMAT 88830 update User Information Download Page 46

Installation and connection instructions

46

Installation of the appliance

3 

Washing machines with curved panels are not suitable for installing 
under units.

Transporting the appliance

•

Do not place the washing machine on its front or on its right side 
(viewed from the front). Otherwise, electrical components can get 
wet.

•

Never transport the unit without the transport safeguard. Do not re-
move the transport safeguard until the appliance is at the installation 
location. Transporting the unit without the transport safeguard can 
damage it.

•

Lift the appliance neither by an open filling door nor by the base.

When transporting the unit with a sack trolley:

•

Attach the sack trolley only at the side. The sack trolley shovel must 
not be longer than 24 cm, otherwise the float switch can be de-
stroyed.

Remove transportation protection

Important! 

It is essential to re-

move the transport safeguard be-
fore putting the unit into 
operation. Keep all parts of the 
transport safeguard in a safe 
place for possible later transport 
(moving).

0 

1.

Open both hose holders on the 
unit's rear side and remove the 
hoses and mains cable.

Summary of Contents for OKO-LAVAMAT 88830 update





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands