Operating Instructions
25
Completion of the Washing Program
Program sequence display
Before the start, the program steps to be
run are shown by the program sequence
display. The current program step is dis-
played during the washing program.
Multi-display
The expected remaining duration (in mi-
nutes) is shown in the multidisplay until the end of
the program.
3
With automatic program adaptation by the controller of the washing
machine, (quantity of washing, type of washing, imbalance recognition,
special rinse etc.) it is possible to stop or correct the counting of the re-
maining run time.
Display
/
(MOISTURE%/LOADING%)
The following appear alternately at the display:
•
The expected residual dampness of the washing at
the end of the program. This value depends on the
set spin speed.
•
Loading the washing drum (in 10 percent steps.)
This value is only displayed in the case of the programs
t
(COTTONS/LINEN) and
}
EASY CARES)/
<
(EASY IRON).
The washing machine can recognise the load only fifteen minutes af-
ter a program start. As soon as a value for the load is pending the dis-
play alternates between residual dampness and load.
Drum overloads are indicated with values of over 100 percent
(e. g.
120
).
3
Due to differences in the fabric type and in the load quantity, in the
case of
}
(EASY CARES)/
<
(EASY IRON) and
Ã
(DELICATES), the
washing reaches a lower value for residual dampness than is the case
with
t
(COTTONS/LINEN).
Change the Spin Speed
During the washing program, the spin speed can still be changed or a
rinse hold can be set (display
0
).
Other settings cannot be changed.
(PRE WASH)
(MAIN WASH)
(RINSE)
(RINSE+)
(SPIN)
(END)
