background image

Instructions for use

15

Before the First Wash

Carry out a washing operation without washing (COTTONS/WITTE WAS, 
BLANC 95 °C, with half the quantity of washing powder/liquid).
This removes residues left over from production on the drum and solu-
tion container.

Prepare the Washing Cycle

Sort and Prepare the Washing

Sort the washing according to care codes and type (see ”Washing 
Types and Care Codes”).

Empty pockets.

Remove metal parts (paper clips, safety pins etc.).

To prevent washing damage and washing snags: Close zip fasteners, 
button closed bed covers and pillow cases, and tie together ribbons, 
e.g. on aprons.

Use clothing made of double-layer fabric (sleeping bag, anorak etc.).

On knitted, coloured textiles and on wool and textiles with fitted 
decorations: Turn inside out.

Wash small and sensitive items (baby socks, stockings, tights, bras 
etc.) in a washing net, a cushion with a zip fastener or in larger socks.

Treat curtains with particular care. Remove small metal rollers or 
small, burred rollers or tie them in a net or in a bag. We cannot ac-
cept any liability for damage.

Do not wash coloureds and whites together in one washing cycle. 
Otherwise, whites will discolour or turn grey.

New coloureds often contain surplus dye. It is best to wash such 
items separately the first time.

Mix small and large items of washing! This speeds up theeffect of 
washing and the washing is more favourably distributed during spin-
ning.

Loosen up the washing before loading it into the washing machine.

Put the washing into the drum folded out.

Pay attention to the care instructions ”Wash separately” and ”Wash 
separately several times”!

Summary of Contents for OKO-LAVAMAT 82730

























































Reviews: