AEG Milano 40 V.2_en
13
Setting the Flash time
The flash key "R" can be set with three different flash-times (80 / 100 / 270 ms).
The flash-time to be used depends on the installation, on which your unit is
connected
•
connected to the public telephone network with comfort functions;
•
connected to a PABX with similar functions.
The comfort functions:
waiting call
toggling
consultation
second call
conference call with three
must be ordered and paid for with your local telephone network operator. Your
provider will also be able to tell you, which flash-time has to be used on his in-
stallation (the flash-time to be set is usually 270 ms).
When the appliance is connected to a personal PABX, its supplier or the deliv-
ered manual can inform you about the flash-time to be set (the flash-time to be
set is usually 100 or 80 ms). The following description does not necessarily cor-
respond to the description in the manual of your PABX.
MENU Press the key MENU. The display shows
Key Lock
.
d
Press the key
d
several times, until
PABX Setting
appears.
OK
Press OK, on the screen appears
Key PIN
.
d
Press the key
d
several times, until
Flash Time
appears on the dis-
play.
OK
Press OK, on the screen appears
Flash-270ms
.
cd
Select the wanted flash-time with the scroll keys.
OK
Confirm your choice and save it by pressing OK.
@
Press ESC twice to leave the menu.
Setting the dialing mode
Two dialing modes are available:
•
MFV (tone):
the actual standard (DTMF mode)
•
IWV (pulses):
only necessary for older installations
Proceed as follows for setting the correct dialing mode:
MENU Press the key MENU. The display shows
Key Lock
.
