5.
Carefully put the appliance down on
its rear side.
6.
Put the front polystyrene packaging
element on the floor under the
appliance.
Make sure not to
damage the hoses.
7.
Remove the polystyrene protection
from the bottom.
1
2
8.
Pull up the appliance in vertical
position.
9.
Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see
water flowing from the
drain hose. This is due to
the testing with water of
the appliance in factory.
10.
Remove the three bolts by using the
spanner supplied with the appliance.
11.
Pull out the plastic spacers.
12.
Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
5.2
Accessories
1
2
3
4
ENGLISH
9
