11.10
Interrupting a
program
and changing the
options
When the program is running, you
can
change
only some
options:
1.
Touch the Start/Pause button.
The related indicator flashes.
2.
Change the options. The given
information in the display changes
accordingly.
3.
Touch the Start/Pause button again.
The washing program continues.
11.11
Cancelling a running
program
1.
Press the On/Off button to cancel
the program and to deactivate
the appliance.
2.
Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
program.
If the ProSense phase is
already carried out and the
water filling is already
started, the new program
starts
without repeating
the ProSense phase
. The
water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration
of the program,
updating it
about 20 minutes
after the
starting of the new
program.
11.12
Opening the door -
Adding garments
While a program or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
1.
Touch the Start/Pause button.
In the display the related door lock
indicator goes off.
2.
Open the appliance door. If
necessary, add or remove the items.
3.
Close the door and touch the Start/
Pause button.
The program
or the delay start
continues.
4.
The door can be opened when the
program is complete, or set
spinning or draining program/
option and than press Start/Pause
button.
11.13
End of the program
When the program has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pause button
goes off.
The door unlocks and the indicator
goes off.
1.
Press the On/Off button to
deactivate the appliance.
After five minutes from the end of the
program, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected program
.
Turn
the
program dial to set a
new
cycle.
2.
Remove the laundry from the
appliance.
3.
Make sure that the drum is empty.
4.
Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5.
Close the water tap.
11.14
Draining water out after
end of cycle
If you have chosen a program or an
option that does not empty out the
www.aeg.com
26
