AEG LB 1483 User Manual Download

Page: 20 / 24

Problem

Possible cause

Possible solution

The water inlet hose is
damaged.

Make sure that the water inlet
hose has no damages.

The filters in the water
inlet hose is blocked .

Clean the filters. Refer to 'Care
and cleaning'.

The water tap is blocked
or is furred with lime-
scale.

Clean the water tap.

The connection of the
water inlet hose is not
correct.

Make sure that the connection
is correct.

The water pressure is
too low.

Contact your local water author-
ity.

The appliance
does not drain the
water.

The water drain hose is
damaged.

Make sure that the water drain
hose has no damages.

The filter of the drain
pump is blocked.

Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.

The connection of the
water drain hose is not
correct.

Make sure that the connection
is correct.

A washing programme
without the drain phase
is set.

Set the drain programme.

The function Rinse &
Hold is on.

Set the drain programme.

The appliance
door is open or
not closed cor-
rectly.

Close the door correctly.

The anti-flood de-
vice is on.

• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.

The spin phase
does not operate.

The spin phase is off.

Set the spin programme.

The filter of the drain
pump is blocked.

Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.

Balance problems with
the laundry load.

Adjust manually the items in the
tub and start the spin phase
again.

The programme
does not start.

The mains plug is not
connected in the mains
socket.

Put in the mains plug.

20 www.aeg.com

Summary of Contents for LB 1483

























Search results

Summary of Contents for LB 1483

Reviews:

Related manuals for LB 1483

Brands by name

Popular brands

AEG LB 1483, User Manual

Search results

Summary of Contents for LB 1483

Reviews:

Related manuals for LB 1483

Brands by name

Popular brands