background image

9. 

BEFORE FIRST USE

Put a small quantity of detergent in the
main wash compartment of the deter-
gent dispenser. Set and start a pro-
gramme for cotton at the highest tem-

perature without laundry. This removes
all possible dirt from the drum and the
tub.

10. 

USING THE APPLIANCE

1.

Open the water tap.

2.

Connect the mains plug to the mains
socket.

3.

Press button 

1

 to activate the ap-

pliance.

4.

Put the laundry in the appliance.

5.

Use the correct quantity of deter-
gent and additives.

6.

Set and start the correct programme
for the type of laundry and soil.

10.1 

Loading the laundry

A

1.

Open the lid of the appliance.

2.

Push the button A (depending on
model). The drum opens automati-
cally.

3.

Put the laundry. Make sure to not
put too much laundry into the drum.

4.

Close the drum and the lid of your
washing machine.

Before you close the lid of your
appliance, make sure that you
close the drum correctly.

10.2 

Using detergent and additives

• Measure out the detergent and the

fabric conditioner.

Detergent compartment for prewash phase.
The marks MAX are the maximum levels for the quantity of de-
tergent (powder or liquid).

12 www.aeg.com

Summary of Contents for LB 1483

























Reviews: