background image

OFF function automatically deacti-
vates the appliance.

When you activate the appliance
again, the display shows the end
of the last set programme. Turn
the programme knob to set a
new cycle.

• Remove the laundry from the appli-

ance. Make sure that the drum is emp-
ty.

• Keep the door ajar, to prevent mildew

and odours.

• Close the water tap.

The washing programme is comple-
ted, but the 'Rinse Hold' function is
on:

– The drum turns regularly to prevent

the creases in the laundry.

– The door stays locked.
– You must drain the water to open the

door.

To drain the water:

1.

If necessary, decrease the spin
speed.

2.

Press the Start/Pause button 

4

 .

The appliance drains the water and
spins.

3.

When the programme is completed
and the door lock symbol goes off,
you can open the door

4.

Deactivate the appliance.

The appliance drains and spins
automatically after approximately
18 hours.

11. 

HELPFUL HINTS AND TIPS

11.1 

The laundry load

• Divide the laundry in: white, coloured,

synthetics, delicates and wool.

• Obey the washing instructions that are

on the laundry care labels.

• Do not wash together white and col-

oured items.

• Some coloured items can discolour

with the first wash. We recommend
that you wash them separately for the
first times.

• Button up pillowcases, close zippers,

hooks and poppers. Tie up belts.

• Empty the pockets and unfold the

items.

• Turn inside out multilayered fabrics,

wool and items with painted illustra-
tions.

• Remove hard stains.
• Wash with a special detergent heavy

soil stains.

• Be careful with the curtains. Remove

the hooks or put the curtains in a
washing bag or pillowcase.

• Do not wash in the appliance :

– Laundry without hems or with cuts
– Underwired bras.

– Use a washing bag to wash small

items.

• A very small load can cause balance

problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase again.

11.2 

Stubborn stains

For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the
appliance.
Special stain removers are available. Use
the special stain remover that is applica-
ble to the type of stain and fabric.

11.3 

Detergents and additives

• Only use detergents and additives

specially made for washing machines.

• Do not mix different types of deter-

gents.

• To help the environment, do not use

more than the correct quantity of de-
tergent.

• Obey the instructions that you find on

the on packaging of these products.

ENGLISH

15

Summary of Contents for LB 1483

























Reviews: