E
DELAY START
- symbol.
F
The display shows the following information:
•
Duration of the selected programme
– After setting a programme, the duration is displayed in hours and
minutes (for example
).
– After the programme has started, the remaining time is updated
every minute.
•
Delay start
– When setting a delay start, the display shows the delay time (20
hours max.) for about 3 seconds (for example
), and then it
shows again the programme duration.
– The delay time value decreases by one unit every hour and then,
one hour before the end of the programme, the time decreases ev-
ery minute.
•
Incorrect option setting
– In case of wrong setting the display shows the message
Err
and the
yellow light of the button
8
starts blinking.
•
Alarm codes
– If an operating problems occur, the display can show some alarm
codes, for example
(see chapter «Troubleshooting»).
•
End of the programme
– At the end of the programme the display shows blinking zero ,
the symbol
disappears and the door can be opened.
G
TIME SAVING
- option symbol.
H
DOOR
- symbol
• This symbol indicates if the door can be opened:
– The symbol is on: the door cannot be opened. The appliance is
performing a washing programme.
– The symbol is off: the door can be opened. The washing pro-
gramme is finished.
I
Available options: PREWASH
, STAIN
, SENSITIVE
, EXTRA
RINSE
ENGLISH
9