Problem
Possible cause/Solution
Spinning starts late or
the machine does not
spin:
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can re-
sume. If, after some minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin.
• The laundry load is perhaps to little, add more
items, redistribute the load manually and then se-
lect the spinning programme.
No water is visible in
the drum:
Appliances based on modern technology operate very
economically using very little water without affecting
performance.
The display shows the
alarm code
:
Anti-flooding system has activated.
• Pull out the plug from the power socket, close the
water tap and contact the Service Force Centre.
SERVICE
• Refer to the information supplied with
this appliance for guarantee condition
and point of contact. The information
to give to the service is on the rating
plate.
We recommend that you write the in-
formation here:
Model
(MOD.)
..................
Product number
(PNC)
..................
Serial number
(S.N.)
..................
INSTALLATION
UNPACKING
1.
Use the gloves. Remove the external
film. If necessary, use a cutter.
26 www.aeg.com