background image

After some minutes from

the end of the

programme, the energy

saving function

deactivates the appliance

automatically.

1.

Remove the laundry from the

appliance.

2.

Make sure that the drum is empty.

After drying phase, clean the

drum, the seal and the inside

of the door with a wet cloth.
The indicator   appears on

the display to remind you to

clean the air filter (refer to

'Cleaning the air filters' in

'Care and cleaning' chapter).

14. 

FLUFF IN THE FABRICS

During the washing and/or drying phase,

some types of fabric, (sponge, wool,

sweatshirt) could release fluff.
The released fluff could stick to the

fabrics during the next cycle.
This inconvenient increases with

technical fabrics.
To prevent the fluff in your laundry, we

recommend that you:
• To do not wash dark fabrics after you

washed and dried light coloured

fabrics (hand towel, wool, sweatshirt )

and the contrary.

• To dry this type of fabrics at open air

when they are washed the first time.

• To clean the drain filter.

• After the drying phase, clean the

empty drum, the gasket and the door

with a wet cloth.

To remove the fluff inside the drum,

set a special programme:

• Empty the drum.

• Clean the drum, the gasket and the

door with a wet cloth.

• Set the rinse programme.

• Simultaneously press the Manchas/

Pre-Lav. and the Anti-arrugas/rugas

buttons until the display shows 

CLE

 to

activate the cleaning function.

• Touch the Inicio/Pausa button to start

the programme.

If the appliance is frequently

used, carry out the 

CLE

programme regularly.

15. 

HINTS AND TIPS

WARNING!

Refer to Safety chapters.

15.1 

The laundry load

• Divide the laundry into: white,

coloured, synthetics, delicates and

wool.

• Follow the washing instructions on the

laundry care labels.

• Do not wash white and coloured

items together.

• Some coloured items can discolour

with the first wash. We recommend

that you wash them separately for the

first couple of times.

• Turn multilayered fabrics, wool and

items with printed illustrations inside

out.

• Pre-treat tough stains.

• Wash heavy soil stains with a special

detergent.

• Be careful with curtains. Remove the

hooks and put the curtains in a

washing bag or pillowcase.

• Do not wash laundry without hems or

with cuts. Use a washing bag to wash

small and/or delicate items (e.g.

underwired bras, belts, tights,

shoelaces, ribbons, etc. ).

• A very small load can cause balance

problems with the spin phase leading

to excessive vibration. If this occurs:

ENGLISH

35

Summary of Contents for L9WEC163C





















































Reviews: