AEG L7WBE846G User Manual Download Page 16

Page: 16 / 52

Temperature indicator. The

indicator appears when a cold wash is

set.

Spin speed indicator.

- No Spin indicator.

Iron drying indicator.

Cupboard drying indicator.

Extra drying indicator.

7.3 Multilingual badges

Adhesive badges in different languages

are supplied with the appliance.
The desired badge can be glued next to

the programme dial.

Program

Antiallergi

20 min. - 3

Motionstøj

Koge-/Kulø

Syntetisk

Finvask

Uld/Silke

Damp

Vattæpper

Jeans

8. DIAL AND BUTTONS

8.1 Introduction

When pressing a key

combination, do not tilt your

fingers downwards . The

sensors of the underneath

buttons are sensitive and

may interfere with Your

choice.

8.2 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.
As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.
For more details, refer to Stand-by

paragraph in Daily Use chapter.

8.3 Introduction

The options/functions are

not selectable with all

washing programmes.

Check the compatibility

between options/functions

and washing programmes in

the "Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

Make sure the screen and

touch buttons are always

clean and dry.

8.4 Temperature

When you select a washing programme,

the appliance automatically proposes a

default temperature.
Touch this button repeatedly until the

desired temperature value appears on

the display.

www.aeg.com

Summary of Contents for L7WBE846G





















































Search results

Summary of Contents for L7WBE846G

Reviews:

Related manuals for L7WBE846G

Brands by name

Popular brands

AEG L7WBE846G, User Manual

Search results

Summary of Contents for L7WBE846G

Reviews:

Related manuals for L7WBE846G

Brands by name

Popular brands