background image

When the display shows the indicators

 and 

, the appliance does not heat

the water.

8.5 Spin 

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.
Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the No Spin option 

.

This option is available only with the

Spin/Drain programme. The appliance

skips all spin phases and only drains

the water. The display shows the
indicator 

.

8.6 Stains/Prewash 

Press this button repeatedly to activate

one of the two options.
The relevant indicator goes on in the

display.

• Stains 

Select this option to add an anti-stain

phase to a programme in order to

treat heavily soiled or stained laundry

with stain remover.

Pour the stain remover into
compartment 

. The stain remover

will be added in the appropriate phase

of the washing programme.

This option is not

available with a

temperature lower than

40 °C.

• Prewash 

Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust , mud and other

solid particles.

The options can increase the

programme duration.

These two options cannot be

set together.

8.7 Delay Start

With this option you can delay the start of

a programme in a more convenient time.
Tap on the button repeatedly to set the

required delay. The time increases by

steps of 30 minutes up to 90' and from 2

hours up to 20 h.
After starting the cycle by the means of

the Start/Pause button, the display

shows the selected delay time and the

appliance begins the countdown.

8.8 Quick 

With this option you can decrease the

programme duration.
• If your laundry is normally or lightly

soiled, it may be advisable to shorten

the washing programme. Touch this

button once to decrease the duration.

• In case of smaller load, touch this

button twice to set an extra quick

programme.

On the display the programme duration

is adjusted accordingly.
When this button is set, the led above

the button is on.

This option can also be used

to shorten the steam

programme duration.

8.9 Time Dry

In the programme where it is selectable,

touch this button to set the time that suits

the fabrics you have to dry (refer to

"Timed drying" table). The display shows

the set value.
Each time you touch this button the time

value increases by 5 minutes.

You cannot set all time

values for different types of

fabrics.

ENGLISH

17

Summary of Contents for L7WBE846G





















































Reviews: