AEG L7FEQ96ES, User Manual

Page: 36 / 64

The Remote Control
activates automatically when
you press the Start/Pauze/
Départ/Pause button to start
the programme, but it is also
possible to start a washing
programme remotely. This
function is deactivates when
door is open.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote button and the
indicator blinks on the display
for a few seconds.
2. Touch the Start/Pauze/Départ/Pause
button to activate the Remote Start
before the indicator
stops
blinking.
The indicators and appear on the
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start/
Pauze/Départ/Pause button
after the indicator
stops blinking, the Remote
Start is not activated, but the
set programme starts.
To remove the Remote Start, tap on the
Remote button and confirm by
pressing the Start/Pauze/Départ/Pause
button.
11.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
12. DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Aan Uit/Marche Arrêt
button for a few seconds to activate
the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Eco 40-60 programme.
The display shows the programme
duration, the maximum load (for a few
seconds only), the default temperature,
the default spin speed and the indicators
of the phases making up the programme.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
www.aeg.com 36