AEG L7FEQ96ES, User Manual

Page: 25 / 64

9.4 AutoDose configuration
mode
Enter the AutoDose
configuration mode before
proceeding with any
programme setting. The
configuration mode may
cancel temporary settings .
1. Press the Aan Uit/Marche Arrêt
button for a few seconds to activate
the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in configuration mode, hold
pressed the Temp. and the
Centrif./Essorage buttons
simultaneously for a few seconds
until the display shows the
on
the left in the display and blinking
detergent tank
and softener tank
indicators on the right in the
display.
4. Touch related tank buttons to toggle
function off and on. The display
shows OFF when a tank is disabled
or shows tank indicator when it is
enabled.
5. To set basic dosage touch related
tank buttons until default dosage
laundry product and two arrows on
bottom of display appear. Touch the
Temp. button repeatedly to adjust
the dosage upwards and the Centrif./
Essorage button to adjusts it
downwards. Minimum step is 1 ml.
6. After about 10 seconds the display
returns to the programme information
screen or hold pressed the Temp.
and the Centrif./Essorage buttons
again to exit immediately.
9.5 Filling the detergent and
additives on AutoDose
system
Please read "Detergents and
other treatments" in "Hints
and tips" chapter.
We recommend that you do
not exceed the maximum
indicated level (
).
1. Open the detergent dispenser.
2. Lift up the AutoDose cover lid.
ENGLISH 25