AEG L7FEQ96ES, User Manual

Page: 19 / 64

By means of Centrif./Essorage touch button, you can also set:
•
Drain Only
Activate the drain-only option (Skipping the wash, rinse
and spin phases):
The appliance performs the only draining phase of the selec‐
ted washing programme.
The display shows the indicator
(cold), the indicator
(no spin) and the indicator .
• Spin Only
Activate the spin-only option (Skipping the wash and rinse
phases):
Before setting this option, select a suitable
washing programme for the garments. The ap‐
pliance will performs the most fitting spin cycle
for your garments care (e.g. For synthetics
items, first select the Synthetica/Synthétiques
washing programme and then the Spin Only
option).
The appliance performs only the spinning phase of the selec‐
ted washing programme.
The display shows the indicator
(cold), the phase indica‐
tor and the spin speed.
11
Temp. touch
button
When you select a washing programme, the appliance automati‐
cally proposes a default temperature.
Touch this button repeatedly until the desired temperature value
appears on the display.
When the display shows the indicators
and , the appli‐
ance does not heat the water.
12
Aan Uit/Marche
Arrêt push but‐
ton
Pressing this button for a few seconds allows to activate or deacti‐
vate the appliance. Two different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically deacti‐
vates the appliance to decrease the energy con‐
sumption in a few cases, you may need to acti‐
vate the appliance again.
Refer to "Stand-by option" paragraph in "Daily
Use" chapter for more details.
Permanent Extra
Rinse
With this option you can permanently have an extra rinse.
To activate/deactivate this option touch the Centrif./Essorage
button and the Intens./Voorw.-Intensif/Prélav. button simultane‐
ously, the relevant indicator comes on/goes off over rinse
phase symbol.
This option adds two rinses.
ENGLISH 19