AEG L7FEQ96ES User Manual Download Page 18

Page: 18 / 64

Centrif./Essor‐

age touch but‐

ton

When you set a programme, the appliance automatically selects

the maximum spin speed.

Touch this button repeatedly to:

• Decrease the spin speed.

The display shows only the spin speeds avail‐

able for the set programme.

•

Activate the Rinse Hold option .

The water of the last rinse is not drained out to prevent the fab‐

rics from creasing. The washing programme ends with water in

the drum and the final spin phase is not performed.
The display shows the indicator

. The door stays locked.

The drum turns regularly to reduce creasing. You must drain

the water to unlock the door.

Touch Start/Pauze/Départ/Pause button: the appliance per‐

forms the spinning phase and drains the water.

•

Activate the Extra Silent option.

All spinning phases (intermediate spin and final spin) are sup‐

pressed and the programme ends with water in the drum. This

helps to reduce creasing.

As the programme is very quiet, it is suitable for use at night

time when cheaper electricity tariffs are available. In some pro‐

grammes the rinses are performed with more water.
The display shows the indicator . The door stays locked.

The drum turns regularly to reduce creasing. You must drain

the water to unlock the door.

Touch the Start/Pauze/Départ/Pause button button: the appli‐

ance performs only the draining phase.

The appliance empties the water out automati‐

cally after approximately 18 hours.

www.aeg.com

Summary of Contents for L7FEQ96ES

































































Search results

Summary of Contents for L7FEQ96ES

Reviews:

Related manuals for L7FEQ96ES

Brands by name

Popular brands

AEG L7FEQ96ES, User Manual

Search results

Summary of Contents for L7FEQ96ES

Reviews:

Related manuals for L7FEQ96ES

Brands by name

Popular brands