5
ENGLISH
2.
SAFETY INSTRUCTIONS
2.1 Service
• To repair the appliance contact an Au-
thorised Service Centre. Use original
spare parts only.
•
Please note that self-repair or non-pro
-
fessional repair can have safety con-
sequences and might void the guaran-
tee.
• The following spare parts will be
available for 7 years after the model
has been discontinued: thermostats,
temperature sensors, printed circuit
boards, light sources, door handles,
door hinges, trays and baskets. Please
note that some of these spare parts
are only available to professional re-
pairers, and that not all spare parts are
relevant for all models.
• Door gaskets will be available for 10
years after the model has been discon-
tinued.
2.2 Installation
WARNING!
Only a qualified per
-
son must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appli-
ance.
• Obey the installation instruction sup-
plied with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Make sure the air can circulate around
the appliance.
• Wait at least 4 hours before connect-
ing the appliance to the power supply.
This is to allow the oil to flow back in the
compressor.
• Do not install the appliance close to ra-
diators or cookers, oven or hobs.
• The rear of the appliance must stand
against the wall.
• Do not install the appliance where there
is direct sunlight.
• Do not install this appliance in areas
that are too humid or too colds, such as
the construction appendices, garages
or wine cellars.
• When you move the appliance, lift it by
the front edge to avoid scratching the
floor.
2.3 Electrical connection
WARNING!
Risk of fire and electri
-
cal shock.
WARNING!
When positioning the
appliance, ensure the supply cord
is not trapped or damaged.
WARNING!
Do not use multi-plug
adapters and extension cables.
• The appliance must be earthed.
• All electrical connections should be
made by a qualified electrician.
• Make sure that the electrical informa-
tion on the rating plate agrees with the
power supply. If not, contact an elec-
trician.
• Always use a correctly installed shock-
proof socket.
• Do not use multi-plug adapters and ex-
tension cables.
• Make sure not to cause damage to
the electrical components (e.g. mains
plug, mains cable, compressor). Con-
tact the Service or an electrician to
change the electrical components.
• The mains cable must stay below the
level of the mains plug.
• Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
• When positioning the appliance, en-
sure the supply cord is not trapped or
damaged.
• Do not locate multiple portable sock-
etoutlets or portable power supplies at
the rear of the appliance.
