•
Always use oven gloves to remove or put in accessories or
ovenware.
•
Before carrying out any maintenance, disconnect the
appliance from the power supply.
•
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
•
Do not use the appliance before installing it in the built-in
structure.
•
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
•
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre
or similarly qualified persons to avoid an electrical hazard.
•
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
•
Use only the food sensor (core temperature sensor)
recommended for this appliance.
6/56
SAFETY INFORMATION