AEG KO-LAVAMAT 70730 User Information Download Page 11

Page: 11 / 56

Instructions for use

EASY-CARES (KREUKHERSTELLEND, DEFROISSABLE)

Main washing cycle for easy-care textiles (mixed fabrics) at 40 °C to
60 °C.

EASY IRON position (STRIJKVRIJ, SANS REPASSAGE): Main washing
cycle at 40 °C for easy-care textiles which, with the aid of this program,
only have to be either gently ironed or not ironed at all.

DELICATES (FIJNE WAS, LINGE DELICAT)

Main washing cycle for delicates at 30 °C or 40 °C.

WOOLLENS (WOL, LAINE)/

(Handwash)

Main washing cycle (cold up to 40 °C) for machine-washable woollens
and for hand-washable wool textile and silk with the care symbol

(handwash).

GENTLE RINSE (FIJN SPOELEN, RINC. DELICAT)

Separate gentle rinse e.g. for rinsing hand-washed textiles (2 rinses, liq-
uid care agent from rinsing compartment

is added, short spin).

STARCHING (STIJVEN, AMIDON.)

Separate starching, separate conditioner, separate impregnation of
damp washing (1 rinse, liquid care agent from the rinsing compartment

is added, spin).

PUMP OUT (POMPEN, VIDANGE)

Pumping off the

water after a rinse hold (without spin).

Rinse hold means: The washing remains lying in the last rinsing water.
It is not spun.

SPIN (CENTRIFUG., ESSORAGE)

Pumping off the water after a rinse hold and spin, or separate spin of
hand-washed cottons/linen.

SHORT SPIN (KORT CENTRIFUG., ESSOR. DELICAT)

Pumping off the water after a rinse hold and short spin or separate
short spin of sensitive textiles (easy-care washing, delicates, woollens).

Summary of Contents for KO-LAVAMAT 70730

























































Search results

Summary of Contents for KO-LAVAMAT 70730

Reviews:

Related manuals for KO-LAVAMAT 70730

Brands by name

Popular brands

AEG KO-LAVAMAT 70730, User Information

Search results

Summary of Contents for KO-LAVAMAT 70730

Reviews:

Related manuals for KO-LAVAMAT 70730

Brands by name

Popular brands