AEG KO-LAVAMAT 70730 User Information Download Page 41 | Manualshive

Page: 41 / 56

background image

Instructions for use

41

Additional Rinse (RINSE+//)

The washing machine is set for extremely economical water consump-
tion. However, for persons who suffer from allergies, it can be helpful
to rinse with more water.

3

If RINSE+ (, ) is set, an additional rinse is per-
formed in the case of the programs COTTONS/LINEN (WITTE/BONTE
WAS, BLANC/COULEURS), EASY-CARES (KREUKHERSTELLEND,
DEFROISSABLE)/EASY IRON (STRIJKVRIJ, SANS REPASSAGE) and
DELICATES (FIJNE WAS, LINGE DELICAT).
No additional rinse is set when the unit is delivered.

Set Additional Rinse:

0

1.

Turn the program selector to COTTONS/LINEN (WITTE/BONTE WAS,
BLANC/COULEURS), EASY-CARES/EASY IRON (KREUKHERSTELLEND,
DEFROISSABLE/STRIJKVRIJ, SANS REPASSAGE) or DELICATES (FIJNE
WAS, LINGE DELICAT) with any temperature.

2.

Simultaneously keep the button PRE WASH (VOORWAS, PRELAV.) and
the button QUICK WASH (KORT, COURT) pressed for at least 2 seconds.
RINSE+ (, ) lights up on the program run indicator.
The additional rinse is set. It remains saved until you cancel it again.

3

The additional rinse increases water consumption and the program run
time.

Cancel Additional Rinse:

0

1.

Again turn the program selector to COTTONS/LINEN (WITTE/BONTE
WAS, BLANC/COULEURS), EASY-CARES/EASY IRON (KREUKHERSTEL-
LEND, DEFROISSABLE /STRIJKVRIJ, SANS REPASSAGE) or DELICATES
(FIJNE WAS, LINGE DELICAT).

2.

Simultaneously keep the button PRE WASH (VOORWAS, PRELAV.) and
the button QUICK WASH (KORT, COURT) pressed for at least 2 seconds.
RINSE+ (, ) goes out in the program run indicator.
The additional rinse is cancelled.

«
...
39
40
41
42
43
...
»

Summary of Contents for KO-LAVAMAT 70730

























































Reviews:

No comments

Related manuals for KO-LAVAMAT 70730

Brand: Maidaid Halcyon Pages: 17

Brand: Panasonic Pages: 44

Brand: Zanussi Pages: 3

Brand: Zanussi Pages: 20

Brand: Zanussi Pages: 24

Brand: Zanussi Pages: 16

Brand: GE Pages: 2

Brand: Hoover Pages: 15

Sicily Glory G01

Brand: Midea Pages: 65

HD 10/25-4 Cage Plus

Brand: Kärcher Pages: 224

FP-90LST060GMTL-N

Brand: Midea Pages: 5

Brand: GE Pages: 12

Brand: Alliance Laundry Systems Pages: 14

Brand: V-ZUG Pages: 44

Hotpoint HDA3400G

Brand: Hotpoint Pages: 2

Brand: NEFF Pages: 31

Brand: COMENDA Pages: 98

Brand: HEUTE Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands