IST Series UPS (10kVA-200kVA)
User Manual
3 Installation
31
Step 3
Unpack the external package, remove the foam pad and plastic bag, and take out the
accessories.
Step 4
Check the UPS.
Inspect the appearance of the UPS and check if there has any damage caused by
transportation. If any damage, please inform the carrier immediately.
Compare with the packing list and check if the accessories mode is complete and
proper. If the accessories lack or model wrong, please take note and contact the our
company or local agency of our company.
Step 5
Dismantle the 4 fasten bolts of bottom supporting plate and UPS, and 4 fasten bolts of wooden
bracket and bottom supporting plate, and then, remove the supporting plates, as shown in
Figure3-5.
Figure3-5
Remove bottom supporting plates
The bottom supporting plates of the UPS are the same, In above figure, we take 80kVA as an example
to illustrate.
Step 6
Loosen the brake of all the wheels or heighten the 4 supporting feet (as shown in Figure3-6).
The wheels of 10kVA, 20kVA, 30kVA, 40kVA, 50kVA, 60kVA is equipped with brake, the wheels of 50kVA,
80kVA, 100kVA, 140kVA, 140kVA is equipped with supporting foot.
