When rinse aid chamber is empty, the
rinse aid indicator is on notifying to refill
rinse aid. If the drying results are
satisfactory while using multi-tablets
only, it is possible to deactivate the
dispenser and the indicator. However, for
best drying performance, always use
rinse aid and keep the rinse aid indicator
active.
To deactivate the rinse aid dispenser and
indicator, set the level of rinse aid to 0A.
6.3
End sound
You can activate an acoustic signal that
sounds when the programme is
completed.
Acoustic signals sound also
when a malfunction of the
appliance occurs. It is not
possible to deactivate these
signals.
6.4
AirDry
AirDry improves the drying results. The
appliance door opens automatically
during the drying phase and remains
ajar.
AirDry is automatically activated with all
programmes.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
CAUTION!
If children have access to the
appliance, we advise to
deactivate AirDry. The
automatic opening of the
door may pose a danger.
When AirDry opens the
door, Beam-on-Floor might
not be completely visible. To
see if the programme is
complete, look at the control
panel.
6.5
Key tones
The buttons on the control panel make a
click sound when you press them. You
can deactivate this sound.
6.6
Latest programme
selection
You can set the automatic selection of
the most recently used programme and
options.
The latest programme that was
completed before the appliance
deactivation is saved. It is then selected
automatically after you activate the
appliance.
When the latest programme selection is
disabled, the default programme is ECO.
6.7
Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
B
A
C
A. Previous
button
B. OK
button
C. Next
button
www.aeg.com
12
