English
18
Use
Dry massage
The device can be used for a short time without water
for massaging the feet.
WARNING:
During the dry massage the device may only be opera-
ted in the „Massage“ position.
Wet massage
In order to enjoy a wet massage, fill the device with
warm water.
Footbath
• Place the appliance on the floor so that you can sit
comfortably in front of it.
• Fill the device with cold or warm water. Do not fill
past the maximum mark (see inner wall (MAX FULL)).
Make sure that the mains plug is not inserted before
you fill the device.
• Only connect the machine to a properly installed
safety socket, 230 V/50 Hz.
• Sit down and put your feet in the appliance.
• Set the mode of operation.In order to do so please
turn the switch to the following settings:
•
0 / Off
•
Massage (Massage)
•
Heat + M Bubbles
(Heat + m bubble)
• Enjoy a deep, penetrating massage by moving your
feet backwards and forwards over the reflex zone
knobs.
• You can also use the massage rollers supplied. Attach
the rollers in the recesses/holes provided on the bot-
tom. Please ensure that they lock into place.
After use
• After use, switch the device to
0/Off (Off) and
remove the mains plug.
• Tip the device forwards and pour the water through
the aperture.
NOTE:
The purpose of the heat generated by the appliance
is not exclusively for the warming of the water. It is
generated to avoid its rapid cooling.
Cleaning
• Before cleaning remove the plug from the socket.
• The spray water protection device can be pulled up in
order to facilitate cleaning. Then replace the splash
guard.
• Never immerse the device in water in order to clean
it.
• Se a moist cloth to clean the appliance.
• Do not use rough or abrasive detergents.
• Dry the appliance with a dry cloth.
Technical Data
Model: ................................................................................... FM 5507
Power supply: ....................................................220-240 V, 50 Hz
Power consumption:...............................................................50 W
Protection class: ..............................................................................
II
Net weight: ............................................................................1,47 kg
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no
longer use to the collection points provided for their
disposal.
This helps avoid the potential effects of incorrect dis-
posal on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
05-FM 5507 AEG_Korr.indd 18
18.04.11 12:18
