manualshive.com logo in svg

AEG FAVORIT 60850 ViM, User Information, Page: 14 / 52

Share
Download
AEG FAVORIT 60850 ViM User Information Download Page 14

14

Activating rinse aid inflow when 3in1 function is se-
lected

3

If the 3in1 function is not selected, the rinse aid inflow is always acti-
vated.

If the 3in1 function is selected due to the use of 3in1 detergent, the 
rinse aid inflow is deactivated. If the dishes then do not dry sufficiently, 
you should re-activate the rinse aid inflow (see also section “Using 3in1 
detergents”).

1.

Press the ON/OFF button.

3

If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this dishwashing cycle has been acti-
vated. The dishwashing cycle must be deselected:
Press function buttons 

2

and

3 

simultaneously for approx. 2 seconds. 

The LED indicators of all the programme buttons that can be selected 
light up.

2.

Press function buttons 

2

and

3

 simultaneously and keep them pressed.

The LED indicators for function buttons 1 to 3 will flash.

3.

Press function button 

2

.

The LED indicator for function button 

2

 will flash.

The multi-display will indicate the current setting:  

4.

Pressing function button 

2

 activates and deactivates the rinse aid dis-

pensing function.

5.

Once the multi-display is indicating the required setting, press the ON/
OFF button. The setting is now saved.

0d

Rinse aid inflow deactivated when 3in1 on (factory setting)

1d

Rinse aid inflow activated when 3in1 on

Summary of Contents for FAVORIT 60850 ViM





















































Reviews:

No comments