33
Installing the Dishwasher
•
The dishwasher must be installed on a firm floor and adjusted to en-
sure that it is stable and level in all directions.
•
To compensate for unevenness in
the floor and to match the height
of the appliance to that of sur-
rounding units, extend the thread-
ed feet using a screwdriver.
•
Adjust the rear feet of the appli-
ance using a screwdriver from the
front of the appliance. (See instal-
lation instructions.)
•
The drain hose, inlet hose and
mains cable must be laid so that
they are able to move freely within
the plinth area, and so that they
are not kinked or crushed when the dishwasher is in position.
•
The dishwasher must also be screwed tightly to the work surface or to
the adjoining units. This is essential to ensure the dishwasher does
not tip up.
Dishwashers That Can be Integrated
(see installation template supplied)
3
The door of the appliance can be fitted with a wooden door/cupboard
door with the following dimensions:
Width:
591 – 594 mm
Depth:
16 – 24 mm
Height:
(variable)
dependent on
–
Recess height
–
Plinth height
–
Adjusting the dishwasher to match the height of
adjoining units
The exact height must be measured at the place of in-
stallation from the adjoining units.
Weight:
max. 8 kg
