11
Setting the Amount of Rinse Aid Required
3
Only change the amount dispensed, if smears, milky spots (reduce the
amount) or dried on water spots (increase the amount) can be seen on
glasses and dishes. (See section “If dishwashing results are not satisfac-
tory”.) The dosage can be set from 1-6. The dosage is pre-set to “4” in
the factory.
1.
Open the dishwasher door.
2.
Press the release button on the rinse
aid compartment.
3.
Open the cover.
4.
Set the dosage level.
5.
Press the lid shut until it clicks into
place.
6.
If rinse aid has leaked out, wipe it
away with a cloth.
