English
45
Intended use
Defect
Unpacking
Setting up
The DVD-Player is solely intended for the following tasks:
Playing of Video DVD/Video CD.
Playing of Audio-CD,
Reception of radio programmes.
Any other use is considered non-intended use and is prohibited.
If the machine should become defective at some point:
If the power supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer services, in order to
avoid hazards.
Should fl uid have seeped into the player or if the player has been
dropped down or damaged in any other way, the player must be exa-
mined by an authorized dealer. Disconnect the player from the power
supply and consult an authorized dealer.
Setting up and connecting
Unpack the appliance and all accessories and check that the contents are
complete.
ATTENTION:
Always transport/send the player in its original packaging to prevent
it from being damaged. Keep the packaging for this purpose. Dispose
of unnecessary packaging material in accordance with the regulations
applicable in your country.
NOTE:
Get in touch with your dealer immediately if you notice damage caused
by transport.
1. Place the components one above the other on a stable, horizontal and
fl at surface. Keep a distance of at least 10 cm from walls and objects.
2. Connect the mains lead to the mains connection socket (Fig. 2/30) on
the back of the device.
3. Connect the device to a properly installed power socket.
NOTE: Place the DVD player components at the top.
05-DVD 4619 HC_GB.indd 45
05-DVD 4619 HC_GB.indd 45
28.05.2009 8:08:56 Uhr
28.05.2009 8:08:56 Uhr
