10
TROUBLESHOOTING
PROBLEM
CAUSE
POSSIBLE SOLUTION
Air leak near the top of the tool
or in the trigger area
Loose screws
Tighten screws
Worn or damaged O-rings or seals
Install overhaul kit
Air leak near the bottom of the
tool
Loose screws
Tighten screws
Worn or damaged O-rings or bumper Install overhaul kit
Tool does nothing or operates
sluggishly
Inadequate air supply
Verify adequate air supply
Inadequate lubrication
Lubricate the tool
Worn or damaged O-rings or bumper Install overhaul kit
Tool jams frequently
Incorrect fasteners
Verify that fasteners are the correct size
Damaged fasteners
Replace fasteners
Loose magazine or nose screws
Tighten screws
Dirty magazine
Clean magazine
Worn or damaged driver
Install driver maintenance kit
TPG20110208v4