background image

Operating Instructions

MXN064

8

tion equipment such as head, hear-
ing and foot protection equipment.
Serious eye or permanent hearing
loss could result.

Assuring that the tool is kept in
safe working order as described in
this manual.

Assuring the proper maintenance
of all tools in employer’s possession.

Ensuring that tools which require
repair are not further used before
repair. Tags and physical segrega-
tion are recommended means of
control.

Danger indicates 
an imminently haz-

ardous situation which, if not avoided,
WILL result in death or serious injury.

!

DANGER

Table of Contents

General Safety  . . . . . . . . . . . . .1-3

Specifications  . . . . . . . . . . . . . . .2

Operating The Nailer  . . . . . . .3-5

Operational Mode  . . . . . . . . . . .4

Troubleshooting  . . . . . . . . . . . . .7

Warranty  . . . . . . . . . . . . . . . . . . .8

Description

This nailer is designed for decorative
trim, molding, window casings, furni-
ture trim and picture frame assembly.
Features include: convenient rear load-
ing magazine which holds up to 100
nails, no-mar tip, adjustable exhaust,
single cycle trigger, quick clear nose,
and an adjustable depth of drive mech-
anism.

General Safety
Information

CALIFORNIA PROPOSITION 65

You
can cre-

ate dust when you cut,
sand, drill or grind materi-
als such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.

This manual contains safety, opera-
tional and maintenance information.
Contact your Maxus representative if
you have any questions.

!

DANGER

OPERATOR’S RESPONSIBILITY:

The tool operator is responsible for:

Reading and understanding tool
labels and manual.

•  Selecting an appropriate tool actua-

tion system, taking into considera-
tion the work application for which
the tool is used.

The safe use of the tool.

Ensuring that the
tool is used only
when the operator
and all other person-
nel in the work area
are wearing ANSI Z87 eye protec-
tion equipment, and when
required, other appropriate protec-
tion equipment such as head, hear-
ing and foot protection equipment.
Serious eye or permanent hearing
loss could result.

Assuring that the tool is kept in safe
working order as described in this
manual.

EMPLOYER’S RESPONSIBILITY:

•  Selecting an appropriate tool actua-

tion system, taking into considera-
tion the work application for which
the tool is used.

Ensuring that this manual is avail-
able to operators and personnel
performing maintenance.

The safe use of the tool.

Enforcing that the
tool is used only
when the operator
and all other person-
nel in the work area
are wearing ANSI Z87 eye protec-
tion equipment, and when
required, other appropriate protec-

Operating Instructions

Model MXN064 

Finishing 

Nailer

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or
property damage! Retain instructions for future reference.

Model MXN064

IN277100AV  4/04

Maxus Nailers meet or exceed Industries’
Standards as set forth by the American
National Standard Institute/International
Staple, Nail and Tool Association in ANSI/ISAN-
TA SNT-101-2002. 
© 2004 

See Warranty on page 8 for important information about commercial use of this product.

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Locate model number on decal, date
code on body and record below:

Model No. ________________________

Date Code ________________

Retain these numbers for 

future reference.

;;;;;;

;;;;;;

;;;;;;

;;;;;;

;;;;;;

Limited Warranty

1.

DURATION: From the date of purchase by the original purchaser as follows: Campbell Hausfeld (Standard Duty and

Unannounced) – One (1) Year, (Serious Duty) – Two (2) Years, (Extreme Duty) – Three (3) Years; IronForce by Campbell
Hausfeld – One (1) Year; Farmhand – Three (3) Years; Maxus – Five (5) Years. 

2.

WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive,

Harrison, Ohio, 45030, Telephone: (800) 543-6400

3.  WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the

Campbell Hausfeld product. 

4.  WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld nailer, stapler, air tool, spray gun, infla-

tor or air accessory supplied or manufactured by Warrantor. 

5.  WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which occur within the

duration of the warranty period. 

6.  WHAT IS NOT COVERED UNDER THIS WARRANTY:

A.

Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED
FROM THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this product is used for commercial,
industrial or rental purposes, the warranty will apply for ninety (90) days from the date of purchase. Some States
do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you.

B.

ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY
DEFECT, FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States do not allow the exclu-
sion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to
you.

C.

Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance
with instructions provided in the owner’s manual(s) supplied with product. Accident, purchaser's abuse, neglect or
failure to operate products in accordance with instructions shall also include the removal or alteration of any safety
devices. If such safety devices are removed or altered, this warranty is void.

D.

Normal adjustments which are explained in the owner’s manual(s) provided with the product.

E.

Items or service that are normally required to maintain the product, i.e. o-rings, springs, bumpers, debris shields,
driver blades, fuses, batteries, gaskets, packings or seals, fluid nozzles, needles, sandblast nozzles, lubricants, mate-
rial hoses, filter elements, motor vanes, abrasives, blades, cut-off wheels, chisels, chisel retainers, cutters, collets,
chucks, rivet jaws, screw driver bits, sanding pads, back-up pads, impact mechanism, or any other expendable part
not specifically listed. These items will only be covered for ninety (90) days from date of original purchase.
Underlined items are warranted for defects in material and workmanship only.

F.  Cosmetic defects that do not interfere with the product’s function.

7.

RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option, products or com-
ponents which are defective, have malfunctioned and/or failed to conform within duration of the warranty period. 

8.

RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:
A.

Provide dated proof of purchase and maintenance records.

B.

Deliver or ship the Campbell Hausfeld product or component to the nearest Campbell Hausfeld Authorized Service
Center. Freight costs, if any, must be borne by the purchaser.

C.

Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s). 

9.

WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair or replacement will be

scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability
of replacement parts.

This Limited Warranty applies in the United States, Canada and Mexico only and gives you specific legal rights. You may
also have other rights which vary from state to state or country to country.

Reviews: