Top lamp
Step 1
Turn the glass cover to remove
it.
Step 2
Remove the metal ring and clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Attach the metal ring to the glass cover and install it.
Side lamp
Step 1
Remove the left shelf support
to get access to the lamp.
Step 2
Use a Torx 20 screwdriver to
remove the cover.
Step 3
Remove and clean the metal
frame and the seal.
Step 4
Replace the lamp with a suita‐
ble 300 °C heat-resistant
lamp.
Step 5
Install the metal frame and the
seal. Tighten the screws.
Step 6
Install the left shelf support.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or oper‐
ate the oven.
The oven is not connected to
an electrical supply or it is
connected incorrectly.
Check if the oven is correctly
connected to the electrical
supply (refer to the connec‐
tion diagram if available).
The oven does not heat up.
The oven is turned off.
Turn on the oven.
The oven does not heat up.
The clock is not set.
Set the clock.
The oven does not heat up.
The necessary settings are
not set.
Make sure that the settings
are correct.
The oven does not heat up.
The automatic switch-off is
on.
Refer to "Automatic switch-
off".
The oven does not heat up.
The Child Lock is on.
Refer to "Using the Child
Lock".
www.aeg.com
60
Summary of Contents for BSE792320M BSK792320M
Page 1: ...USER MANUAL EN User Manual Steam oven BSE792320M BSK792320M ...
Page 65: ......
Page 66: ......
Page 67: ......