6.4
Activating a heating
function
1.
Activate the appliance.
2.
Select the Heating Functions menu.
Press
OK
to confirm.
3.
Set a heating function. Press
OK
to
confirm.
4.
Set the temperature. Press
OK
to
confirm.
Press
to go directly to the
Heating Functions menu. You
can use it when the appliance is
activated.
6.5
Steam cooking
The water drawer cover is in the control
panel.
1.
Press the cover to open the water
drawer.
2.
Fill the water drawer with 800 ml of
water.
The water supply is sufficient for ap-
proximately 50 minutes.
Do not put water directly into the
steam generator.
Use only water as the liquid. Do
not use filtered (demineralised)
or distilled water.
3.
Activate the appliance.
4.
Set the steam heating function (refer
to the “Heating functions” table)
and the temperature.
5.
If necessary, set the function Dura-
tion
or End Time
. The first
steam shows after approximately 2
minutes. An acoustic signal sounds
when the appliance is at approxi-
mately the set temperature. The sig-
nal sounds again at the end of the
cooking time.
6.
Deactivate the appliance.
When the steam generator is
empty, an acoustic signal
sounds.
When the appliance is cool, soak up all
remaining water from the steam genera-
tor with the sponge. If necessary, clean
the steam generator with vinegar. Let
the appliance dry fully with the door
open.
6.6
Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
Fast Heat Up Indicator
This function decreases the heat-up
time. To activate the function, hold
for 3 seconds. The heat-up indicator al-
ternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.7
Energy saving
The appliance contains features
which help you save energy
during everyday cooking:
•
Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
•
Cooking with the lamp off
- touch
and hold
for 3 seconds to deacti-
vate the lamp during cooking.
•
Eco functions
- refer to section "Heat-
ing Functions" (for selected models
only).
ENGLISH
13
Summary of Contents for BS9314001
Page 1: ......
Page 2: ...BS9314001 EN User manual ...
Page 46: ...min 50 mm 600 560 min 530 min 30 20 min 567 572 579 548 546 594 594 114 5 21 ENGLISH 45 ...
Page 52: ...ENGLISH 51 ...
