(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
•
Cooking with the lamp off
- touch
and hold
for 3 seconds to deacti-
vate the lamp during cooking.
•
Eco functions
- refer to section "Heat-
ing Functions" (for selected models
only).
7.
CLOCK FUNCTIONS
Symbol
Function
Description
Minute Minder
To set a countdown (max. 2 h 30 min). This func-
tion has no effect on the operation of the appli-
ance. You can also activate it when the appliance
is deactivated. Use to activate the function.
Press
or
to set the minutes and
OK
to start.
Duration
To set how long the appliance has to be in opera-
tion (max. 23 h 59 min).
End Time
To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
process until the time ends (3 -
20 minutes).
Setting the clock functions
1.
Set a heating function.
2.
Press
again and again until the
display shows the necessary clock
function and the related symbol.
3.
Press
or
to set the necessary
time. Press
OK
to confirm. When the
time ends, an acoustic signal
sounds. The appliance deactivates.
The display shows a message.
4.
Press a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time, if you want to automat-
ically activate and deactivate the ap-
pliance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration
and End Time functions do not work.
7.1
Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate the
function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
14 www.aeg.com
Summary of Contents for BS8314001
Page 1: ...BS8314001 EN User manual ...
