67
ENGLISH
Remove sleeve (D) and frame (B) from the unit. Use
installation keys (C), if necessary.
Place the sleeve in the ISO slot.
Bend the claws outward with a screwdriver for perfect
fit.
Check the sleeve for tight fit.
Connect the ISO female connectors of the unit with
the two ISO male connectors of the vehicle.
Connect the antenna to the antenna connector at the
rear of the unit.
Secure the unit against theft, if necessary. Attach bolt
and mounting strip with the fastening materials at the
firewall.
Carefully slide the unit into the sleeve until it locks
into place.
Press
RESET
(25) with a pen or other pointed object
after all connections are made.
Attach the front panel (A) as described under “Attach
Front Panel”.
CAUTION
Cable damage possible!
To avoid cable damage observe the cables when slid-
►
ing the unit into the sleeve.
Attach the frame.
Remove Unit
Follow these instructions to remove the unit:
Remove the frame.
Insert left and right installation keys in the slots left
and right (the claws are now bent back).
Slide the unit out of the sleeve.
NOTE
Unevenness of the casing can cause the claws to
►
lock. Unlock the claws with the installation keys, if
necessary.
Toyota or Nissan Installation
NOTE
Sleeve, frame and mounting strip are not needed.
►
Use the threads on the side of the casing (A) to mount the
unit on the vehicle bracket (supplied with your car). The
holes are marked with T (for Toyota) and N (for Nissan).
A
B
C
D
B
Loosen the mounting screws for the hooks left and
right at the front of the unit and remove the hooks.
Mount the brackets (B) with screws on the unit (D).
Connect External Audio Device
Connect line out of the external audio device to
AUX
IN
(12) jack on the front panel.
Select playback mode for external device by repeatedly
pressing
MODE
(22) until
AUX
is displayed.
Summary of Contents for AR 4020
Page 89: ......
