background image

1. Pull the drawer out.

Max

Ma

x

Max

Salt

Max

2. Eliminate any trace of detergent or

additive and clean the compartment

thoroughly.

3. Insert the drawer back and pour salt

in the compartment 

Salt

.

4. Close the drawer.

5. Run a cotton or synthetic cycle,

without reducing time, to restore the

water softener function.

17. CONSUMPTION VALUES

17.1 Introduction

See the web link www.theenergylabel.eu for

detailed information about Energy Label.

The QR codes on the EU and UK energy labels

supplied with the appliance provide a web link to the

information related to the performance of the

appliance. For the energy label with the EU flag, it is

also possible to find the information in the EU

EPREL database using the link https://

eprel.ec.europa.eu and the model name and

product number that you find on the rating plate of

the appliance. Refer to 'Product description' chapter

for the position of the rating plate. Keep the energy

labels for reference together with the user manual

and all other documents provided with this

appliance.

17.2 Legend

kg

Laundry load.

hh:mm Programme duration.

kWh

Energy consumption.

°C

Temperature in the laundry.

Litres

Water consumption.

rpm

Spin speed.

%

Remaining moisture at the end of spinning phase. The higher is the spin speed,

the higher is the noise and the lower is the remaining moisture.

www.aeg.com

52

Summary of Contents for ABSOLUTECARE 9000





























































Reviews: