AEG ABSOLUTECARE 9000, User Manual

Page: 17 / 60

The digital indicator can show:
• Programme duration (e. g.
).
The time shown when the programme is set could
not correspond to effective duration and change af‐
ter ProSense phase.
• Maximum load.
• Finish in time (e. g.
or ).
• Cycle end ( ).
• Warning code (e.g.
).
• Indication of total operating hours of the appliance. Refer to the 'Op‐
erating hours counter' section in the 'Settings' paragraph for more
details.
• When working with the APP: , (access point), (up‐
date). Please refer to the chapter 'Wi-FI - Connectivity setup'.
Maximum load indicator. The value is shown for three seconds after
programme selection, alternated with cycle duration.
Maximum laundry indicator. It blinks if the laundry amount exceeds the
declared load.
Salt refilling indicator. The compartment
Salt
needs salt refilling: the
compartment is empty or the salt is not enough.
This indicator reminds to run a cleaning cycle.
APP notification to check.
Remote connection indicator.
Wi-Fi connection indicator.
Child safety lock indicator.
The Temperature area:
Temperature indicator
Cold water indicator
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Quiet indicator.
Rinse hold indicator.
Pre-wash indicator.
Stain indicator.
ENGLISH 17