5.
Press again and again until the
display shows: Set + Go.
6.
Press
to confirm.
Press any symbol (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
the heating function
works.
• The menu: Basic Settings
lets you turn the function:
Set + Go on and off.
10.5
Automatic Switch-Off
For safety reasons the oven turns off
automatically after some time, if a
heating function works and you do not
change any settings.
(°C)
(h)
30 - 115
12.5
120 - 195
8.5
200 - 245
5.5
(°C)
(h)
250 - maximum
3
The Automatic Switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
10.6
Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the oven is
turned off, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– if the oven is turned off and you
set the function: Minute Minder.
When the function ends, the
display goes back to the night
brightness.
10.7
Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
11.
HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
11.1
Cooking
recommendations
Your oven may bake or roast differently
to the oven you had before. The tables
below show recommended settings for
temperature, cooking time and shelf
position for specific types of the food.
If you cannot find the settings for a
special recipe, look for the similar one.
www.aeg.com
22
