background image

2

Congratulations from AEG

Dear Customer,

Congratulations with your new Hob.

It is important that you become familiar with the functions and features of 
the Hob.  You should therefore read these operating instructions as they will 
help you get the most out of your new Hob.
Pay extra attention to sections marked       . These are warning texts to help 
you avoid accidents.

Keep the operating instructions.  They will come in handy if there is 
something you are not sure about, and should accompany the Hob if it is 
transferred to a new owner.

The structure of the operating instructions enables you to use them as a 
reference manual.  The first part of the operating instructions contains a 
general description of your new product.  Then follows a short introduction 
of the things to do before you use the Hob for the first time.  The section 
“How to use” describes how the Hob is used in everyday life.  Use this 
section until you are familiar with your new Hob.  The section “Cleaning 
and Maintenance” provides information on both daily and more thorough 
cleaning of the individual components of the Hob.  Should problems arise 
when you use the Hob, you can look in the section “Before calling service”, 
where there are instructions on how to remedy some practical and technical 
problems yourself.

Enjoy!

Regards,

Summary of Contents for 3531 WK-m













Reviews: