39
Figure 32
. Tightly hold with both hands the
second inner glass “E” and remove it from
its original position also by sliding it
upwards.
After removing the inner glass, clean the oven
door and the glasses.
We recommend to clean the oven door using
only a wet sponge and dry it after cleaning with
a soft cloth. Never use steel wool, acids or abra-
sive products as they can damage the surface.
After cleaning, place the two inner glasses back
in their original positions.
To correctly mount the inner glass “E”
(without stripes along the sides) the
white dot visible in the glass should
appear in the top right angle of the glass
itself.
To correctly mount the inner glass “D”
(with stripes along the sides) the surface
marked with stripes has to face the oven
door in a way that, when touching the
surface on sight, the light roughness of
the silk-screen printing is not
perceptible.
After placing the inner glasses back, insert
support “C” in its position and, then:
Figure 33
. place the right end of the aluminium
bar “A” in the proper slot located in support
“C”.
Figure 34
. place the left end of the aluminium
bar “A” in the proper slot located in support
“B”. Now, insert support “B” in its original
position and make sure the assembly is well
fixed and secure.
E
A
C
A
B
Fig. 33
Fig. 34
Fig. 32
