aee.com
19
3.4 Precautions
(1) Check if the propellers are installed properly and reliably before each flight.
(2) Check if the propellers are in good condition before each flight. Replace the aged or damaged propellers
if any.
(3) For your safety, do not get close to or contact the rotating motors or propellers.
(4) For the best flight effect, use AEE propellers only.
WARNING:
(1) To install the propellers without product damage, follow the direction marks strictly to turn them with
appropriate pressure.
(2) The motor is in high-temperature state after each use. To prevent burns, do not remove the propellers
until the motor cools down.
3.5 Install the Propeller Guard Rings
Follow the steps below to install the propeller guard rings:
(1) Prepare the UAV, four propeller guard rings, eight PM2.5×12 screws and a hexagonal screwdriver.
(2) Press the propeller guard rings down from the top of the motors (Fig. A).
(3) Tighten the PM2.5×12 screws (Fig. B) to secure the four propeller guard rings and then install the four
blades.
(4) Fig. C shows the installation effect.
Fig. A Remove the original screws. Fig. B Install the propeller guard rings. Fig. C Installation Effect