AEC IST7 20kVA, User Manual

Page: 35 / 86

AEC UPS IST7 10-30 kVA
User Manual 2 Overview
27
Adjust the support feet in clockwise to height the supporting feet, and adjust in anticlockwise to lower
the supporting feet.
During operating, do not adjust one supporting foot only, adjust the four supporting feet in phase,
which is to avoid tilting even device damage.
Put the tilting plate to the front of the UPS, and keep the higher end of the sliding plate close to the wooden bracket,
and move the UPS to ground slowly, as shown in Figure1.9.
Figure1.9 Place the sliding plate
The operation for the sliding plate of the UPS are the same, In above figure, we take 80kVA-120kVA
UPS as an example to illustrate.
During moving, it needs to operate by two people (one at left side and one at right side) to avoid tilting
or human injury.