5
Menu Keys
These keys bring up the Meter Settings, Options settings, and Memory Operations menus, respectively.
For details, please refer to the
Menus
section, on page 8.
Function Keys
Help Key
The Help key has two modes of operation; First, if no function keys are active (CRSR,
FREQ, etc.) and no menus are open, pressing Help will open the help information for the
displayed Measurement Screen. This includes help with navigation in the screen and
adjusting Frequency or Scale ranges. Second, when a menu is open or a function key is
active Context Sensitive Help will open and provide instructions and options that address that particular
open or highlighted menu item or function. Using the Help key is a great tool for getting started, refreshing
your memory on how things work.
SWR/RL
Press the SWR/RL key to directly access SWR & RL. Once there, pressing SWR/RL will
alternate between SWR and Return Loss modes. See section 3
: Measurement Screens
for
information on cycling modes, setup, and scales.
VNA Key
Press the VNA Key to access complex impedance measurements such as Z-Mag, Z-Angle.
See section 3
Measurement Screens
for information on cycling modes, setup, and scales.
FREQ Key
Press the FREQ key to set frequency range of interest. There are two types of setting
screens for this operation:
Press FREQ once to enter START and END FREQUENCIES.
Press twice to enter CENTER FREQUENCY and SPAN.
Use the left/right arrow key to navigate digit positions, the alpha-numeric keypad to enter values, and
up/down arrow key to jump between upper and lower entries. Press ENTER key to save changes and
exit. If Broadband Calibration is selected it will go directly back to the Measurement Screen. If
Frequency Specific Calibration is selected it will exit to the Calibration procedure. See
Page 18
