AEA Technology 20TDR, Basic Manual

Page: 33 / 52

27
displayed, press the key to exit the recalled trace and return to a live Measurement
Screen. Note the cable type will now be the one used to test the recalled trace and all TDR
setups will be the ones used with the recalled trace.
If no trace is being recalled, press to exit the list and return to the Measurement
Screen.
Restore Prior Settings
When a trace is recalled from the memory, the TDR must be restored to the settings used at the
time the trace was saved. If you desire to return to the original settings being used before one or
more traces were recalled press the key to access the memory functions menu shown
in Figure 3-1 above. Then use the ▼ key to move the cursor down to “PRIOR SETTINGS” and
press the ► key to restore the TDR’s settings and cable type being used before recalling traces
from memory.
Delete Traces
To delete a highlighted trace press key and follow on-screen directions. The ESC key
will cancel the delete procedure, any other key pressed will complete the deletion. Traces can
also be deleted using procedures in ETDR PC Vision.
CAUTION: There is no “Undelete.” All deletions in the TDR’s memory are permanent.
ETDR PC Vision
TM
Software
Operating Systems
The ETDR PC Vision software included with the TDR is designed to operate on most PC’s with
the following operating systems:
Windows XP
®
– Home Office and Professional, Windows Vista
®
Windows 7
®
, Windows 8 & 8.1
®
, Windows 10
®
NOTE: TDR PC Vision (for 20/20TDR models) and ETDR PC Vision (for E20/20 TDR and
Avionics TDR models) can reside on the same PC. However, they must be used with their
respective instrument models.
E20/20 TDRs and Avionics TDR use only ETDR PC Vision
20/20 TDRs use only TDR PC Vision