25
9.1.4.3 Power Requirements
The Bravo MRI II may be battery or wall powered. Use of the AEA wall
power pack (PN 5001-0201) is recommended when using wall power.
9.1.4.3.1 DC input (Power jack)
Min 10 VDC (450 ma)
Typical 14VDC (250ma)
Max 20VDC (250 ma)
2.1 mm center pin DC power connector.
Note:
Back light performance is impaired when input is below 12VDC
Positive polarity is applied to the center pin of the power jack for proper operation.
9.1.5 Battery Power (choice of:)
8 AA Alkaline
8 AA NiMH
8 AA NiCad usable with impaired backlight performance.
9.1.6 Absolute Maximum Ratings
9.1.6.1 RF Input (RF jack)
+10dBm Max
+/- 16VDC Max
9.1.6.2 DC Input (power jack)
+/- 20VDC Maximum
9.1.6.3 Serial Port Input
Max applied voltage on Ring (TD) +/- 20 VDC
Max applied voltage on Tip (RD) +/- 10 VDC
9.1.7 Size
8.5 x 4.3 x 2.25 inches