Files
The Files button opens the Files window, which provides access to the DSR 100-15's internal file system, including the
Standards library and the User Standards directory.
The
Standards library
contains the .swg (Standards Waveform Generator) files for a variety of EMC Standards' tests.
The Standards' test files are separated into the main categories, Automotive and Aviation, and organized in sub-
directories by Standard. The Standards library also contains a Factory Test and Setup directory, which contains test
routines that may be required during factory or on-site troubleshooting. All files contained in the Standards library are
Read-Only.
The
User Standards
directory is a write-able storage space to be used to store user-created custom tests and test
variations. Files saved in the User Standards directory can be copied, altered and deleted. Subdirectories can be added
to the User Standards directory.
To open a pre-programmed .swg file, open the Files window and double-click on the Standard's Library directory (or use
the Open button), and then locate the test to be used. Double-click on the test name to load the file into the DSR 100-15's
active window.
Once loaded, simply press the Arrow button to begin generating the required waveform sequence. You can also add or
remove individual waveforms and controls from the test sequence, or make changes to the properties of a waveform or
control, and then save the modified test in the User Standards directory for later use.
The following functions are available in the Files window:
Go Back:
Press the Go Back button to display the files and/or folders one level higher in the file system hierarchy.
Open:
Press the Open button to open the selected folder or file. When a folder is opened, the files and/or folders one
level lower in the file system hierarchy will be shown in the Files window. When a file is selected, pressing the Open
button will cause the file to be loaded into the DSR 100-15's active window. Double-clicking on a folder or file in the Files
window will also function the same as pressing the Open button.
Delete:
Press the Delete button to delete the selected folder(s) or file(s). Confirmation is required before the delete action
is completed. Click on additional folder or file names to select multiple items for deletion. Click on a selected item again to
clear that item from selection. To clear all selected items, use the Clear Selection button.
New Folder:
Press the New Folder button to create a new folder in the User Standards directory. The new folder will be
created at the level currently displayed in the Files window.
Deselect All:
Press the Deselect All button to deselect all selected items. To deselect individual selected items, click
again on the selected item.
Save As:
Press the Save As button to save the test sequence displayed in the active window as a Standards Waveform
Generator (.swg) file. Navigate first to the location in the User Standards directory where you want to save the file. The file
will be saved at the level currently displayed in the Files window.
Copy:
Use the copy button to make a copy of an .swg file located in the DSR 100-15's internal storage. Click on an .swg
file to select, and then press the Copy button to copy the file into the Controller's temporary memory.
Summary of Contents for DSR 100-15
Page 9: ......
Page 18: ...useful for testing a sequence before generating output ...
