Loop Monitor
The Loop Monitor allows the user to track the status of the fixed and variable loops in any test sequence. To enable the Loop
Monitor feature, complete the following steps:
1. Press the Settings button to open the Settings window and locate the Loop Monitor selection box on the Configuration
tab. Check to box labeled "Show Loop Monitor Window During Playback." Press the SAVE button to save your
selection.
2. Create or open the test to be monitored into the DSR 100-15's active window. Press the arrow button to start the test.
3. The Loop Monitor Window will appear in the DSR 100-15 active window and display the loops contained in the test
sequence, displaying the number of completed loops out of the total loops required to complete the sequence.
Note that the Loop Monitor window can be dragged to another location on the screen, if desired.
If the test sequence is stopped, the loop monitor count will also be stopped. If the test is restarted, the loop monitor count will
be reset to the beginning of the count.
Use the X in the upper right of the Loop Monitor window to close the window. Note that this will also prevent the Loop Monitor
window from opening for this or other tests until the Loop Monitor check box is selected again on the Configuration tab in the
Settings window.
Summary of Contents for DSR 100-15
Page 9: ......
Page 18: ...useful for testing a sequence before generating output ...
