27
Figure 5.2.2 Set Network Parameters
Step 3:
Set the port map in the virtual severs of Forwarding. For example, one speed dome’s ports are 80 and 8000
and its IP address is 192.168.1.23. Another speed dome’s ports are 81 and 8001 and IP is 192.168.1.24. Next,
enable all or TCP protocols. Enable the port map after pressing “Save.”
Figure 5.2.3 Set Network Parameters
With the settings mentioned above, map the router’s port 80 and 8000 to VP-16 at 192.168.1.23; and port 81 and
8001 to VP-16 at 192.168.1.24. In this way, user can access the 192.168.1.23 through accessing the router’s port
80 and 8000.
Note:
The port of VP-16 cannot conflict with other ports.
Summary of Contents for VP-16 Series
